| Items |
 K3000x12 Ready K 3000, 129 Millimeter (mm) Fully Opened Length (La) Working Cylinder with Pressure Accumulators List Price Quote
|
K3000x25 Ready K 3000, 155 Millimeter (mm) Fully Opened Length (La) Working Cylinder with Pressure Accumulators List Price Quote
|
K3000x38 Ready K 3000, 181 Millimeter (mm) Fully Opened Length (La) Working Cylinder with Pressure Accumulators List Price Quote
|
K3000x50 Ready K 3000, 205 Millimeter (mm) Fully Opened Length (La) Working Cylinder with Pressure Accumulators List Price Quote
|
K3000x63 Ready K 3000, 231 Millimeter (mm) Fully Opened Length (La) Working Cylinder with Pressure Accumulators List Price Quote
|
|||||
| Description |
Cylinders with stem controlled movement can stop at the desired working position, with the possibility of deciding when stem withdrawal is to take place by means of an electric signal, in accordance with the application that is being executed. Each unit has the following elements:
|
|||||||||
| Brands | Ready | |||||||||
| Additional Information |
The adapter plate locates each unit and links it to the other units in the system. The working cylinder, which is full of oil, is connected through the adapter plate to the pressure accumulator. This is subjected in one of its parts to nitrogen gas pressure, thus providing pressure for the whole system. The accumulator has the capacity to absorb the whole of the volume of oil displaced by the working cylinder. The working cylinder is activated by the movement of the press, displacing the hydraulic volume freely through the adapter plate up to the pressure accumulator. Once the working stroke has been attained, the hydraulic valve, which is controlled by means of an electric signal, stops the return of hydraulic fluid from the accumulator to the working cylinder, at which point the piston movement stops. When the hydraulic valve opens once again, the hydraulic volume returns to the working cylinder, thus bringing about the return of the stem to its stand-by position. The pressure accumulator is regulated in accordance to pressure device norms, as it is charged with nitrogen gas at a pressure of 150 Bar. |
|||||||||
| Application | Work Holding | |||||||||
| Force Increase by Temperature | 33 daN/deg C | |||||||||
| Maximum Stem Speed | 10 m/min | |||||||||
| Maximum Charging Pressure | 150 bar | |||||||||
| Minimum Charging Pressure | 50 bar | |||||||||
| Fully Closed Force (Fc) | 3360 daN | 3740 daN | 4065 daN | 4320 daN | 4560 daN | |||||
| Maximum Stroke Length | 12 mm | 25 mm | 38 mm | 50 mm | 63 mm | |||||
| Fully Opened Length (La) | 129 mm | 155 mm | 181 mm | 205 mm | 231 mm | |||||
| Fully Closed Length (Lc) | 117 mm | 130 mm | 143 mm | 155 mm | 168 mm | |||||
| Fully Opened Force (Fa) | 3000 daN | |||||||||
| Fully Opened Force (Fa) Tolerance (±) | 5 % | |||||||||
| Medium Pressure | Nitrogen Gas (N2) Oil | |||||||||
| Nitrogen Gas (N2) Nominal Pressure | 150 bar | |||||||||
| Rod Seal Area | 19.63 cm² | |||||||||
| Maximum Working Temperature | 60 ºC | |||||||||
| Product Code | ||||||||||
|
|
||||||||||
