Availability |
N/A =CASE WHEN {Quantity} IS NULL THEN NULL WHEN {Inventory}>{Quantity} THEN 'IN STOCK' WHEN {Inventory}>0 AND {Inventory}<{Quantity} THEN 'NOT ENOUGH IN STOCK, CHOOSE LOWER QUANTITY' ELSE 'OUT OF STOCK' END= |
Note |
N/A
If not specified, clamp arrangement L-R willbe finished. Clamp arrangement F-B is furnished on center pin sets. We ship the appropriate number of clamps and 5HCS with each demountable bushing ordered. |
Dimension A |
N/A 25/32 in |
Dimension B |
N/A 5/8 in |
Dimension C |
N/A 0.250 in |
Dimension T |
N/A 3/4 in |
Screw Size |
N/A 5/16 - 18 x 3/4 |
Dimension D |
N/A 7/16 in |
Location M at 1-1/4 Inch (in) Bushing Inside Diameter (ID) |
N/A 1-7/32 in |
Location M at 1-1/2 Inch (in) Bushing Inside Diameter (ID) |
N/A 1-3/8 in |
Location M at 1-3/4 Inch (in) Bushing Inside Diameter (ID) |
N/A 1-1/2 in |
Location M at 2 Inch (in) Bushing Inside Diameter (ID) |
N/A 1-45/64 in |
Location M at 2-1/2 Inch (in) Bushing Inside Diameter (ID) |
N/A 2-5/64 in |
Location M at 3 Inch (in) Bushing Inside Diameter (ID) |
N/A 2-5/16 in |
Location N at 1-1/4 Inch (in) Bushing Inside Diameter (ID) |
N/A 1-17/32 in |
Location N at 1-1/2 Inch (in) Bushing Inside Diameter (ID) |
N/A 1-11/16 in |
Location N at 1-3/4 Inch (in) Bushing Inside Diameter (ID) |
N/A 1-13/16 in |
Location N at 2 Inch (in) Bushing Inside Diameter (ID) |
N/A 2-1/64 in |
Location N at 2-1/2 Inch (in) Bushing Inside Diameter (ID) |
N/A 2-25/64 in |
Location N at 3 Inch (in) Bushing Inside Diameter (ID) |
N/A 2-5/8 in |
Location L at 1-3/4 Inch (in) Bushing Inside Diameter (ID) |
N/A 35 º |
Location L at 2 Inch (in) Bushing Inside Diameter (ID) |
N/A 35 º |
Location L at 2-1/2 Inch (in) Bushing Inside Diameter (ID) |
N/A 40 º |
Location L at 3 Inch (in) Bushing Inside Diameter (ID) |
N/A 45 º |
Location K at 1-3/4 Inch (in) Bushing Inside Diameter (ID) |
N/A 10 º |
Location K at 2 Inch (in) Bushing Inside Diameter (ID) |
N/A 10 º |
Location K at 2-1/2 Inch (in) Bushing Inside Diameter (ID) |
N/A 5 º |
Location K at 3 Inch (in) Bushing Inside Diameter (ID) |
N/A 0 º |
Clamp Per Unit |
N/A 3 4 |
Location L |
N/A 120 º |
Location K |
N/A 45 º |
