Ready Technology, Inc.
Ready Technology, Inc.
333 Progress Road
Dayton, OH 45449
Phone: 800-543-4355
Fax: 937-866-7226
Email: sales@readytechnology.com
Website: www.readytechnology.com
Print Back
When ordering custom, all steel die sets, specify:
  1. This table shows accepted design dimensions. Any or all of these dimensions, however, can be changed to conform to customer's specifications of A, B, O, P, J, K, L, F or W, etc.
  2. All die sets are always made so that the punch holder can not be reversed on die holder. Type 4Ps are made with same diameter posts, but the right front post is offset 1/8" toward outside edge of die set.
  3. Any of these sets are available both with or without shank. Unless otherwise specified, shank is always located in middle of both A and B dimensions. For safety reasons, we supply only threaded shanks. See page 9 for Threaded Shank Selection Chart.
  4. Die sets of design other than shown in catalog can be furnished in steel or aluminum.
  5. Custom die sets may not be returned for credit.
  6. Sintered Bronze Bushings supplied unless otherwise specified.
Custom, Four Post All Steel Die Sets
Unit of Measure
Items Custom, Four Post All Steel Die Sets
3506
6 to 10 Inch (in) Dimension (A) (Left to Right) Custom, Four Post All Steel Die Set
List Price Quote
 Custom, Four Post All Steel Die Sets
3507
11 to 16 Inch (in) Dimension (A) (Left to Right) Custom, Four Post All Steel Die Set
List Price Quote
 Custom, Four Post All Steel Die Sets
3508
17 to 22 Inch (in) Dimension (A) (Left to Right) Custom, Four Post All Steel Die Set
List Price Quote
 Custom, Four Post All Steel Die Sets
3509
23 to 28 Inch (in) Dimension (A) (Left to Right) Custom, Four Post All Steel Die Set
List Price Quote
 Custom, Four Post All Steel Die Sets
3510
29 to 40 Inch (in) Dimension (A) (Left to Right) Custom, Four Post All Steel Die Set
List Price Quote
Description N/A When ordering custom, all steel die sets, specify:
  1. This table shows accepted design dimensions. Any or all of these dimensions, however, can be changed to conform to customer's specifications of A, B, O, P, J, K, L, F or W, etc.
  2. All die sets are always made so that the punch holder can not be reversed on die holder. Type 4Ps are made with same diameter posts, but the right front post is offset 1/8" toward outside edge of die set.
  3. Any of these sets are available both with or without shank. Unless otherwise specified, shank is always located in middle of both A and B dimensions. For safety reasons, we supply only threaded shanks. See page 9 for Threaded Shank Selection Chart.
  4. Die sets of design other than shown in catalog can be furnished in steel or aluminum.
  5. Custom die sets may not be returned for credit.
  6. Sintered Bronze Bushings supplied unless otherwise specified.
Brands N/A Ready
Note N/A Right front pin offset 1/8".

It is recommended to finish heavy (point pressures) machining before grinding for best results. We do not recommend using steel and aluminum plates in a die set combination.
Application N/A
  • Aluminum die sets.
  • Three and four platen die sets.
  • Plate work, ground or unground.
  • Stress relieved plates.
  • Die sets can be made with heel blocks.
  • Per print CNC machining, holes, keyways, cut-outs and burnouts.
Dimension (A) (Left to Right) N/A 6 to 10 in N/A 11 to 16 in N/A 17 to 22 in N/A 23 to 28 in N/A 29 to 40 in
Die Holder Thickness (J) N/A 1-1/4 in N/A 1-1/2 in N/A 1-3/4 in N/A 2 in N/A 2-1/2 in
Punch Holder Thickness (K) N/A 1-1/4 in N/A 1-1/2 in N/A 1-3/4 in N/A 2 in N/A 2-1/2 in
Post Diameter (O) N/A 1 in N/A 1-1/4 in N/A 1-1/2 in N/A 1-3/4 in N/A 2 in
Dimension (F) for (O) Post N/A 2 in N/A 2-1/4 in N/A 2-1/2 in N/A 2-3/4 in N/A 3 in
Dimension (C) for (O) Post N/A 1-1/2 in N/A 1-5/8 in N/A 1-3/4 in N/A 1-7/8 in N/A 2 in
Note for Dimension N/A Dimensions furnished when customer specifies only A and B dimensions.
Product Code N/A DS-C