Item # 3522, 23 to 28 Inch (in) Dimension (A) (Left to Right) Custom, Four Post Ball Bearing Die Set On Ready Technology, Inc.

Unit of Measure

Specifications | Note | Advantages | Die Space

Specifications

Brands	N/A Ready
Dimension (C)	N/A 2-1/4 in
Die Holder Thickness (J)	N/A 2 in
Punch Holder Thickness (K)	N/A 2 in
Post Diameter (O)	N/A 1-3/4 in
Note for Dimension	N/A Dimensions furnished when customer specifies only A and B dimensions.
Dimension (F) for Sleeve Bushing	N/A 3-5/8 in
Dimension (W) for Sleeve Bushing	N/A 1/2 in
Dimension (F) for Demountable Bushing	N/A 3-13/16 in
Dimension (W) for Demountable Bushing	N/A 11/16 in
Product Code	N/A DS-C

Note

Right front pin offset 1/4" to outside

It is recommended to finish heavy (point pressures) machining before grinding for best results. We do not recommend using steel and aluminum plates in a die set combination.

Advantages

One-third the weight of steel
Faster and easier setup
Less wear and tear on the machine (clutch, brake, ram, ...)
Easy machinability means 20-35% increased feed rates
Uses existing conventional cuttings tools
Draws heat away from tooling, then dissipates heat quickly
Rust free, least susceptible to elements
Impervious to typical (water soluble) die lubes
Non-magnetic - good environment for in-die sensing
Stress relieved in the process - a stable material before/after machining
Easily recyclable

Die Space

Dimension (A) (Left to Right)

23 to 28 in

Specifications

Brands

Dimension (C)

Die Holder Thickness (J)

Punch Holder Thickness (K)

Post Diameter (O)

Note for Dimension

Dimension (F) for Sleeve Bushing

Dimension (W) for Sleeve Bushing

Dimension (F) for Demountable Bushing

Dimension (W) for Demountable Bushing

Product Code

Note

Note

Advantages

Advantages

Die Space

Dimension (A) (Left to Right)