-
Compact Nitrogen Die Systems
compact-nitrogen-die-systems
- Ready CDS Type Standard Cylinders
- Ready CDSP Type Pad Mounted Cylinders
- Ready CDSN Type Low Profile Cylinders
- Ready CDSK Type Pancake Cylinders
- Ready CDSF Type Cylinders
-
Ready NP-T Type Small Tanks
When ordering please furnish a sketch showing the location of the safety plug and tapped connecting holes.
-
Ready NPT Type Custom Welded Tanks
These tanks should be selected when a larger gas volume or smaller tank size is required. The arrangement of service ports and tapped holes shown is only an example.
-
Ready TDN-R Type Threaded Tanks
External tanks are required a) when the manifold plate volume is not sufficient to limit the pressure increase to 10%, or b) when pad-mounted cylinders are used. Threaded tanks are quickly produced at a competitive price, and they provide maximum operational safety.
The connection fittings and the control unit can only be assembled on the face of the end cap. For each 5 liters of gas volume one 1/2" - 20 BS 150 safety plug must be used. If the control console is mounted to the tank, its internal safety plug can be counted as one plug. -
Ready Port and Safety Plugs
Drilled diameters larger than 126 mm should be capped with a plate and "O" rings. The number, grade, and preload of the screws must be specified for a pressure of 165 bars (the maximum pressure of the safety plugs), a safety factor of 1.5, and a cyclic fatigue loading.