Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers.
Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.-
Compact Nitrogen Die Systems
compact-nitrogen-die-systems
-
Ready CDS Type Standard Cylinders
-
Ready CDSP Type Pad Mounted Cylinders
-
Ready CDSN Type Low Profile Cylinders
-
Ready CDSK Type Pancake Cylinders
-
Ready CDSF Type Cylinders
-
Ready NP-T Type Small Tanks
When ordering please furnish a sketch showing the location of the safety plug and tapped connecting holes.
-
Ready NPT Type Custom Welded Tanks
These tanks should be selected when a larger gas volume or smaller tank size is required. The arrangement of service ports and tapped holes shown is only an example.
-
Ready TDN-R Type Threaded Tanks
External tanks are required a) when the manifold plate volume is not sufficient to limit the pressure increase to 10%, or b) when pad-mounted cylinders are used. Threaded tanks are quickly produced at a competitive price, and they provide maximum operational safety.
The connection fittings and the control unit can only be assembled on the face of the end cap. For each 5 liters of gas volume one 1/2" - 20 BS 150 safety plug must be used. If the control console is mounted to the tank, its internal safety plug can be counted as one plug. -
Ready Port and Safety Plugs
Drilled diameters larger than 126 mm should be capped with a plate and "O" rings. The number, grade, and preload of the screws must be specified for a pressure of 165 bars (the maximum pressure of the safety plugs), a safety factor of 1.5, and a cyclic fatigue loading.
