Manufacturer Part# / Cross Reference Search
Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers.
Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.| Items |
 /Asset/a1207.jpg K6500x12 Ready K 6500, 152 Millimeter (mm) Fully Opened Length (La) Working Cylinder with Pressure Accumulators List Price Quote
|
/Asset/a1207.jpg K6500x25 Ready K 6500, 178 Millimeter (mm) Fully Opened Length (La) Working Cylinder with Pressure Accumulators List Price Quote
|
/Asset/a1207.jpg K6500x38 Ready K 6500, 204 Millimeter (mm) Fully Opened Length (La) Working Cylinder with Pressure Accumulators List Price Quote
|
/Asset/a1207.jpg K6500x50 Ready K 6500, 228 Millimeter (mm) Fully Opened Length (La) Working Cylinder with Pressure Accumulators List Price Quote
|
/Asset/a1207.jpg K6500x63 Ready K 6500, 254 Millimeter (mm) Fully Opened Length (La) Working Cylinder with Pressure Accumulators List Price Quote
|
|||||
| Description |
Cylinders with stem controlled movement can stop at the desired working position, with the possibility of deciding when stem withdrawal is to take place by means of an electric signal, in accordance with the application that is being executed. Each unit has the following elements:
|
|||||||||
| Brands | Ready | |||||||||
| Additional Information |
The adapter plate locates each unit and links it to the other units in the system. The working cylinder, which is full of oil, is connected through the adapter plate to the pressure accumulator. This is subjected in one of its parts to nitrogen gas pressure, thus providing pressure for the whole system. The accumulator has the capacity to absorb the whole of the volume of oil displaced by the working cylinder. The working cylinder is activated by the movement of the press, displacing the hydraulic volume freely through the adapter plate up to the pressure accumulator. Once the working stroke has been attained, the hydraulic valve, which is controlled by means of an electric signal, stops the return of hydraulic fluid from the accumulator to the working cylinder, at which point the piston movement stops. When the hydraulic valve opens once again, the hydraulic volume returns to the working cylinder, thus bringing about the return of the stem to its stand-by position. The pressure accumulator is regulated in accordance to pressure device norms, as it is charged with nitrogen gas at a pressure of 150 Bar. |
|||||||||
| Application | Work Holding | |||||||||
| Force Increase by Temperature | 0.33 %/°C | |||||||||
| Maximum Stem Speed | 10 m/min | |||||||||
| Maximum Charging Pressure | 150 bar | |||||||||
| Minimum Charging Pressure | 50 bar | |||||||||
| Fully Closed Force (Fc) | 7280 daN | 7885 daN | 8405 daN | 8825 daN | 9220 daN | |||||
| Maximum Stroke Length | 12 mm | 25 mm | 38 mm | 50 mm | 63 mm | |||||
| Fully Opened Length (La) | 152 mm | 178 mm | 204 mm | 228 mm | 254 mm | |||||
| Fully Closed Length (Lc) | 140 mm | 153 mm | 166 mm | 178 mm | 191 mm | |||||
| Fully Opened Force (Fa) | 6500 daN | |||||||||
| Fully Opened Force (Fa) Tolerance (±) | 5 % | |||||||||
| Medium Pressure | Nitrogen Gas (N2) Oil | |||||||||
| Nitrogen Gas (N2) Nominal Pressure | 150 bar | |||||||||
| Rod Seal Area | 44.18 cm² | |||||||||
| Maximum Working Temperature | 60 ºC | |||||||||
| Product Code | ||||||||||
|
|
||||||||||
