Manufacturer Part# / Cross Reference Search

Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers.

Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.
Request a Quote for CAMDRIVE
  • Low cost, versatile design
  • Fits in smallest die space
  • Fast delivery even for options
  • Interchangeable tolerances, metric
  • Hardened components, high production
  • All units come equipped with a mechanical die spring return a Ready SuperString®
Unit of Measure

Specifications

Brands

 N/A CAMDRIVE® Ready

Metric Tonne

 N/A 10 ton

United States (US) Ton

 N/A 11 ton

Maximum Strip Force

 N/A 510 daN1146 lb

Point (D)

 N/A 14.3 to 22.4 mm0.560 to 0.882 in

Maximum Stroke (A)

 N/A 32 mm1.26 in

Product Code

 N/A CD

Note

Note

 N/A Maximum Trigger Stroke = A
Minimum Trigger Stroke = 75% of A
Maximum Work Stroke = 90% of A
All dimension in mm and inch, except when otherwise stated
All dimension are nominal unless tolerance is stated

Dimensions

Dimension (B)

 N/A 48 mm1.889 in

Dimension (C)

 N/A 25 mm0.984 in

Dimension (F)

 N/A 92 mm3.622 in

Dimension (S)

 N/A 139.5 mm5.492 in

Dimension (G)

 N/A 106 mm4.173 in

Dimension (H)

 N/A 129 mm5.079 in

Dimension (O)

 N/A 50 mm1.969 in

Dimension (I)

 N/A 28 mm1.102 in

Dimension (J)

 N/A 15 mm0.591 in

Dimension (K)

 N/A 28.5 mm1.122 in

Dimension (L)

 N/A 45 mm1.772 in

Dimension (M)

 N/A 77 mm3.031 in

Dimension (N)

 N/A 35 mm1.377 in

Dimension (P)

 N/A 66 mm2.598 in

Dimension (Q)

 N/A 16 mm

Dimension (R)

 N/A M14 mm

Dimension (T)

 N/A 6 mm0.236 in

Dimension (U)

 N/A 30 mm1.181 in

Dimension (V)

 N/A 12 mm0.472 in

Dimension (W)

 N/A 33 mm1.300 in

Diagram (End / Top View)

 N/A
Camdrive Top and End View -12 and -13 Models

Diagram (Side View)

 N/A
Camdrive Side View All Models

How to Select Right Unit

How to Select Right Unit

 N/A
  1. Choose the model number which covers the required point diameter (D) and stroke (A).
  2. Confirm that the model's tonnage exceeds the total force (piercing + stripping) required. Total Force = (hole perimeter x material thickness x material tensile strength) + stripping force.
  3. Please Note: point size on standard punches must he specified

CAMDRIVE® Do's and Don'ts

CAMDRIVE® Do's and Dont's

 N/A DO: key in back of unit to resist force.
DO: effect piercing in last quarter of max stroke A.
DO: remember punch stroke equals press stroke (1:1 ratio).
DON'T: mount CAMDRIVE® greater than ±15° without using angle mount option trigger. Note: ±30° max angle with option. No positive return on angle mounts.
DON'T: overstroke the unit.
Max trigger stroke = 90% of A

The CAMDRIVE® Rappel

The CAMDRIVE® Rappel

 N/A The rapple is an internal component that differs with each available option. A rappel can always be changed to a different configuration later providing maximum user flexibility.

Positive Return Option

Positive Return Option

 N/A
  • Available on all units except the angle mount option.
  • Con be used when mounting at angles of ±15°.
  • Conversion kit contains driver and appropriate rappel,
  • Why risk die damage!

Self-Lubricating Bronze Bushing Standard

Self-Lubricating Bronze Bushing Standard

 N/A
  • Standards on all models.
  • Meets U.S. automotive standards.
  • Eliminates the need for a grease fitting.
  • Requires virtually no maintenance while increasing life.
  • Ideal for automotive dies.

Shaped Punch Option

Shaped Punch Option

 N/A
  • Round punch blank with flat on head supplied with this option.
  • Rappel is equipped with a matching flat tangent to punch body diameter (C).
  • Rappel also is guided in CAMDRIVE® body for precision.
  • Special shaped punches per print available, longer delivery and at extra charge.

Angle Mount Option

Angle Mount Option

 N/A
  • Used when mounting at ±15° - 30° (max.)
  • Unit comes with trigger for angle mount.
  • Positive Return option is not available with angle mount.

Retainer Mount Option

Retainer Mount Option

 N/A
  • Mount standard retainers to machinable face.
  • Use the standard or special tools you select.
  • This option available only on: C-0625-11/-12, C-1000-12/-13 and C-1500-12/-13
  • Positive Return option available, special rappel.

Standard Punch Option

Standard Punch Option

 N/A
  • Ready offers CAMDRIVE® punches in two point configurations; custom round pointed (please specify "D" dimension at time of order) and in a punch blank configuration (customer to grind point).
  • Piercing must take place during the last 25% of stroke. Allow additional stroke for punch re-sharpening, when applicable. Do not exceed 90% of stroke.
  • Ready recommends sharpening a punch no more than two times during the course of its life.
  • Special ejector style punches also available upon request.

Accessories

Accessories

 N/A Part Name - Positive Return Driver
Part Number - C-1000

Part Name - CAMDRIVE® Metric Punch Blank
Part Number - 1000-12