Manufacturer Part# / Cross Reference Search

Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers.

Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.
Request Information
Every H-Series Maximum Force gas spring provides the maximum force in a self-contained spring with increased on contact force using a specially designed gas tight seal on the stem rod. Features patented over stroke and free release active protection. Meets VDI Safety protocols.
Unit of Measure

Specifications

Brands

 N/A Ready

Pressure Medium

 N/A Nitrogen Gas (N2)

Maximum Charging Pressure

 N/A 190 bar

Minimum Charging Pressure

 N/A 35 bar

Rod Seal Area

 N/A 4.91 cm²

Operating Temperature

 N/A 0 to 80 ºC

Force Increase by Temperature

 N/A 0.33 %/°C

Maximum Stem Speed

 N/A 25 m/min

Maintenance Kit

 N/A Kit H1000

Body Diameter

 N/A 38 mm

Stroke Length

 N/A 38 mm

Volume

 N/A 0.052 L

Weight

 N/A 0.57 kg

Industry Standards/Certifications

 N/A Pressure Equipment Directive (PED 2014/68/UE)

Equivalent Part Numbers

 N/A Kaller No: CX1000-038 Tecapres No: TPH1000x38

Product Code

 N/A GS

Charging Pressure

Fully Open Force (Fo) at 20 Degree Celsius (ºC) Temperature

 N/A 1000 daN

90 Percent (%) Fully Closed Force (F)

 N/A 1485 daN

100 Percent (%) Fully Closed Force (Fc)

 N/A 1570 daN

Charging Pressure at 20 Degree Celsius (ºC) Temperature

 N/A 190 bar

Dimensions

Fully Open Length (Lo)

 N/A 135 mm

Fully Closed Length (Lc)

 N/A 97 mm

Diagram

 N/A
H-1000-2

Note

Note

 N/A Product improvement through research and development is an ongoing process. All specifications are subject to change without notice.