Manufacturer Part# / Cross Reference Search

Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers.

Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.
Request Information
The R-Series gas spring features a threaded housing for design convenience and flexibility. The rounded head helps absorb radial forces. A range of predetermined forces are available for most models. Meets VDI Safety protocols.
Unit of Measure

Specifications

Brands

 N/A Ready

Pressure Medium

 N/A Nitrogen Gas (N2)

Maximum Charging Pressure

 N/A 175 bar

Minimum Charging Pressure

 N/A 35 bar

Rod Seal Area

 N/A 0.28 cm²

Operating Temperature

 N/A 0 to 80 ºC

Force Increase by Temperature

 N/A 0.33 %/°C

Maximum Stem Speed

 N/A 1.6 m/s

Maintenance Kit

 N/A Kit RB16

Maximum Stroke

 N/A 57 strokes/min

Stroke Length

 N/A 10 mm

Volume

 N/A 0.002 L

Weight

 N/A 0.05 kg

Industry Standards/Certifications

 N/A Association of German Engineers (VDI) Pressure Equipment Directive (PED 2014/68/UE)

Equivalent Part Numbers

 N/A Dadco: E.16.010 Hyson: T2SS3-16X1.5X10 Kaller No: EP316x1.5-10 Special Spring: NE16x1.5-010-B Tecapres No: TPRB16x10

Product Code

 N/A GS

Charging Pressure

Fully Open Force at Yellow Charging Pressure

 N/A 50 daN

Dimensions

Fully Open Length (Lo)

 N/A 65 mm

Fully Closed Length (Lc)

 N/A 55 mm

Housing Outside Diameter (D)

 N/A M16 x 1.5 mm

Piston Outside Diameter (d)

 N/A 6 mm

Mount-Piston Rod Distance (Piston Closed) (P)

 N/A 35 mm

Ring Groove (r)

 N/A 3 mm

Diagram

 N/A
Dimension Key Nitrogen Gas Spring

Note

Note

 N/A Product improvement through research and development is an ongoing process. All specifications are subject to change without notice.
No mounting holes on bottom.