Manufacturer Part# / Cross Reference Search

Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers.

Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.
Request Information
The T-Series stands for Titan! They feature a third more force than the BE Series in a similar sized housing. All T-Series springs are compatible with the optional Shield Scraper which cleans the stem with every stroke and helps avoid penetration of particles and substances to extend the springs useful life. Meets VDI Safety protocols.
Unit of Measure

Specifications

Brands

 N/A Ready

Pressure Medium

 N/A Nitrogen Gas (N2)

Maximum Charging Pressure

 N/A 150 bar

Minimum Charging Pressure

 N/A 50 bar

Rod Seal Area

 N/A 19.63 cm²

Operating Temperature

 N/A 0 to 80 ºC

Force Increase by Temperature

 N/A 0.33 %/°C

Maximum Stem Speed

 N/A 0.8 m/s

Maintenance Kit

 N/A Kit T75

Maximum Stroke

 N/A 25 strokes/min

Stroke Length

 N/A 63 mm

Volume

 N/A 0.274 L

Weight

 N/A 1.99 kg

Industry Standards/Certifications

 N/A Association of German Engineers (VDI) Pressure Equipment Directive (PED 2014/68/UE)

Equivalent Part Numbers

 N/A Tecapres No: Titan75x63

Product Code

 N/A GS

Charging Pressure

Fully Open Force (Fo) at 20 Degree Celsius (ºC) Temperature

 N/A 3000 daN

90 Percent (%) Fully Closed Force (F)

 N/A 5025 daN

100 Percent (%) Fully Closed Force (Fc)

 N/A 5435 daN

Charging Pressure at 20 Degree Celsius (ºC) Temperature

 N/A 150 bar

Dimensions

Fully Open Length (Lo)

 N/A 163 mm

Fully Closed Length (Lc)

 N/A 100 mm

Housing Outside Diameter (D)

 N/A 75.2 mm

Piston Outside Diameter (d)

 N/A 50 mm

Ring Groove (r)

 N/A 2.5 mm

Diagram

 N/A
Dimension Key Nitrogen Gas Spring

Note

Note

 N/A Product improvement through research and development is an ongoing process. All specifications are subject to change without notice.