Manufacturer Part# / Cross Reference Search
Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers.
Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.
Our Demountable Pins are designed for use in either plain
bearing or ball bearing applications. Like our precision press fit
pins, they are case hardened to 60 - 64 Rc, then core tempered
for toughness.
They can be assembled to the same die set plate hundreds of times without distorting the hole center distances or damaging the holes themselves. So they not only simplify die building and maintenance, but they ensure maximum accuracy as well.
Ready demountable pins can be held in place either with toe clamps and screws, or with a retainer plug. This second option increases the die space available.
They can be assembled to the same die set plate hundreds of times without distorting the hole center distances or damaging the holes themselves. So they not only simplify die building and maintenance, but they ensure maximum accuracy as well.
Ready demountable pins can be held in place either with toe clamps and screws, or with a retainer plug. This second option increases the die space available.
Unit of Measure
Specifications
Brands |
N/A Ready |
Dimension B |
N/A 32.6 mm |
Dimension E |
N/A 24 mm |
Nominal Pin Diameter |
N/A 25 mm |
Length F |
N/A 70 mm |
Tap Size |
N/A M6 |
Recommended Seating Torque |
N/A 0.90 kg·m |
Radius M |
N/A 20.3 mm |
Radius N |
N/A 27.8 mm |
Radius Q |
N/A 20.8 mm |
Quantity Per Pillar |
N/A 3 |
Clamp |
N/A 6-90-1 |
Socket Head Cap Screws S |
N/A M6 x 18 |
Socket Head Cap Screws T |
N/A 15 mm |
R6 Bore Diameter |
N/A 24.963 mm24.976 mm |
Product Code |
N/A PB |
Additional Information
Additional Information |
N/A
Our extensive line of metric guide components, which have been used by European toolmakers and stamping plants for over 30 years. Our design is elegantly simple. All of our guide pillars, press fit and demountable, fit an R6 bored hole. All our bushings, ball bearing and plain bearing, straight and demountable, fit an H6 bored hole: As with our line of inch components, each Ready metric pillar can be used either as a plain bearing or ball bearing pin. Every pin and bushing is color coded for Selective Fit™, providing you with the correct running clearance for your application. |