Manufacturer Part# / Cross Reference Search
Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers.
Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.- Low cost, versatile design
- Fits in smallest die space
- Fast delivery even for options
- Interchangeable tolerances, metric
- Hardened components, high production
- All units come equipped with a mechanical die spring return a Ready SuperString®
Unit of Measure
Specifications
|
Note
|
Dimensions
|
How to Select Right Unit
|
CAMDRIVE® Do's and Don'ts
|
The CAMDRIVE® Rappel
|
Positive Return Option
|
Self-Lubricating Bronze Bushing Standard
|
Shaped Punch Option
|
Angle Mount Option
|
Retainer Mount Option
|
Standard Punch Option
|
Accessories
Specifications
Brands |
N/A CAMDRIVE® Ready |
Metric Tonne |
N/A 3 ton |
United States (US) Ton |
N/A 3.3 ton |
Maximum Strip Force |
N/A 210 daN472 lb |
Point (D) |
N/A 4.7 to 11 mm0.185 to 0.433 in |
Maximum Stroke (A) |
N/A 16 mm0.630 in |
Product Code |
N/A CD |
Note
Note |
N/A
Maximum Trigger Stroke = A Minimum Trigger Stroke = 75% of A Maximum Work Stroke = 90% of A All dimension in mm and inch, except when otherwise stated All dimension are nominal unless tolerance is stated |
Dimensions
Dimension (B) |
N/A 36 mm1.417 in |
Dimension (C) |
N/A 13 mm0.512 in |
Dimension (F) |
N/A 68 mm2.677 in |
Dimension (S) |
N/A 84.5 mm3.327 in |
Dimension (G) |
N/A 75 mm2.953 in |
Dimension (H) |
N/A 91 mm3.583 in |
Dimension (I) |
N/A 22 mm0.866 in |
Dimension (J) |
N/A 6.5 mm0.256 in |
Dimension (K) |
N/A 22 mm0.866 in |
Dimension (L) |
N/A 23 mm0.906 in |
Dimension (M) |
N/A 38 mm1.496 in |
Dimension (N) |
N/A 30 mm1.181 in |
Dimension (P) |
N/A 50 mm1.968 in |
Dimension (Q) |
N/A 8 mm |
Dimension (R) |
N/A M8 mm |
Dimension (T) |
N/A 6 mm0.236 in |
Dimension (U) |
N/A 25 mm0.984 in |
Dimension (V) |
N/A 9 mm0.354 in |
Dimension (W) |
N/A 25 mm0.984 in |
Diagram (End / Top View) |
N/A
Camdrive Top and End View -11 Models |
Diagram (Side View) |
N/A
Camdrive Side View All Models |
How to Select Right Unit
How to Select Right Unit |
N/A
|
CAMDRIVE® Do's and Don'ts
CAMDRIVE® Do's and Dont's |
N/A
DO: key in back of unit to resist force. DO: effect piercing in last quarter of max stroke A. DO: remember punch stroke equals press stroke (1:1 ratio). DON'T: mount CAMDRIVE® greater than ±15° without using angle mount option trigger. Note: ±30° max angle with option. No positive return on angle mounts. DON'T: overstroke the unit. Max trigger stroke = 90% of A |
The CAMDRIVE® Rappel
The CAMDRIVE® Rappel |
N/A The rapple is an internal component that differs with each available option. A rappel can always be changed to a different configuration later providing maximum user flexibility. |
Positive Return Option
Positive Return Option |
N/A
|
Self-Lubricating Bronze Bushing Standard
Self-Lubricating Bronze Bushing Standard |
N/A
|
Shaped Punch Option
Shaped Punch Option |
N/A
|
Angle Mount Option
Angle Mount Option |
N/A
|
Retainer Mount Option
Retainer Mount Option |
N/A
|
Standard Punch Option
Standard Punch Option |
N/A
|