Request Information
Every H-Series Maximum Force gas spring provides the maximum force in a self-contained spring with increased on contact force using a specially designed gas tight seal on the stem rod. Features patented over stroke and free release active protection. Meets VDI Safety protocols.
Unit of Measure

Specifications

Brands

 N/A Ready

Pressure Medium

 N/A Nitrogen Gas (N2)

Maximum Charging Pressure

 N/A 190 bar

Minimum Charging Pressure

 N/A 35 bar

Rod Seal Area

 N/A 4.91 cm²

Operating Temperature

 N/A 0 to 80 ºC

Force Increase by Temperature

 N/A 0.33 %/°C

Maximum Stem Speed

 N/A 25 m/min

Maintenance Kit

 N/A Kit H1000

Body Diameter

 N/A 38 mm

Stroke Length

 N/A 38 mm

Volume

 N/A 0.052 L

Weight

 N/A 0.57 kg

Industry Standards/Certifications

 N/A Pressure Equipment Directive (PED 2014/68/UE)

Equivalent Part Numbers

 N/A Kaller No: CX1000-038 Tecapres No: TPH1000x38

Product Code

 N/A GS

Charging Pressure

Fully Open Force (Fo) at 20 Degree Celsius (ºC) Temperature

 N/A 1000 daN

90 Percent (%) Fully Closed Force (F)

 N/A 1485 daN

100 Percent (%) Fully Closed Force (Fc)

 N/A 1570 daN

Charging Pressure at 20 Degree Celsius (ºC) Temperature

 N/A 190 bar

Dimensions

Fully Open Length (Lo)

 N/A 135 mm

Fully Closed Length (Lc)

 N/A 97 mm

Diagram

 N/A
H-1000-2

Note

Note

 N/A Product improvement through research and development is an ongoing process. All specifications are subject to change without notice.