Manufacturer Part# / Cross Reference Search

Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers. Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.

Every H-Series Maximum Force gas spring provides the maximum force in a self-contained spring with increased on contact force using a specially designed gas tight seal on the stem rod. Features patented over stroke and free release active protection. Meets VDI Safety protocols.
Unit of Measure

Specifications

Brands

Ready

Pressure Medium

Nitrogen Gas (N2)

Maximum Charging Pressure

190 bar

Minimum Charging Pressure

35 bar

Rod Seal Area

4.91 cm²

Operating Temperature

0 to 80 ºC

Force Increase by Temperature

0.33 %/°C

Maximum Stem Speed

25 m/min

Maintenance Kit

Kit H1000

Body Diameter

38 mm

Stroke Length

80 mm

Volume

0.110 L

Weight

0.91 kg

Industry Standards/Certifications

Pressure Equipment Directive (PED 2014/68/UE)

Equivalent Part Numbers

Kaller No: CX1000-080 Tecapres No: TPH1000x80

Product Code

GS

Charging Pressure

Fully Open Force (Fo) at 20 Degree Celsius (ºC) Temperature

1000 daN

90 Percent (%) Fully Closed Force (F)

1480 daN

100 Percent (%) Fully Closed Force (Fc)

1560 daN

Charging Pressure at 20 Degree Celsius (ºC) Temperature

190 bar

Dimensions

Fully Open Length (Lo)

240 mm

Fully Closed Length (Lc)

160 mm

Diagram


H-1000-2

Note

Note

Product improvement through research and development is an ongoing process. All specifications are subject to change without notice.