Manufacturer Part# / Cross Reference Search

Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers. Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.

Every H-Series Maximum Force gas spring provides the maximum force in a self-contained spring with increased on contact force using a specially designed gas tight seal on the stem rod. Features patented over stroke and free release active protection. Meets VDI Safety protocols.
Unit of Measure

Specifications

Brands

 Ready

Pressure Medium

 Nitrogen Gas (N2)

Maximum Charging Pressure

 175 bar

Minimum Charging Pressure

 35 bar

Rod Seal Area

 9.62 cm²

Operating Temperature

 0 to 80 ºC

Force Increase by Temperature

 0.33 %/°C

Maximum Stem Speed

 25 m/min

Maintenance Kit

 Kit H1700

Body Diameter

 50 mm

Stroke Length

 38 mm

Volume

 0.092 L

Weight

 1.12 kg

Industry Standards/Certifications

 Pressure Equipment Directive (PED 2014/68/UE)

Equivalent Part Numbers

 Tecapres No: TPH1700x38

Product Code

 GS

Charging Pressure

Fully Open Force (Fo) at 20 Degree Celsius (ºC) Temperature

 1700 daN

90 Percent (%) Fully Closed Force (F)

 2625 daN

100 Percent (%) Fully Closed Force (Fc)

 2795 daN

Charging Pressure at 20 Degree Celsius (ºC) Temperature

 175 bar

Dimensions

Fully Open Length (Lo)

 140 mm

Fully Closed Length (Lc)

 102 mm

Diagram
Ready H-1700 Series Maximum Force Line Gas Spring - 2

Note

Note

 Product improvement through research and development is an ongoing process. All specifications are subject to change without notice.