Request Information
The PE-Series (PE-500 and 750) provides similar force in a smaller body diameter than both the SE and LE-Series gas springs with similar body and stroke lengths of the SE-Series. All models meet ISO and VDI stem rod and body diameter specifications. Compatible with the optional Shield Scraper and can be connected to a linked hose system. Meets VDI Safety protocols.
Unit of Measure

Specifications

Brands

 N/A Ready

Pressure Medium

 N/A Nitrogen Gas (N2)

Maximum Charging Pressure

 N/A 150 bar

Minimum Charging Pressure

 N/A 35 bar

Rod Seal Area

 N/A 3.14 cm²

Operating Temperature

 N/A 0 to 80 ºC

Force Increase by Temperature

 N/A 0.33 %/°C

Maximum Stem Speed

 N/A 1.6 m/s

Maintenance Kit

 N/A Kit SP500.1

Body Diameter

 N/A 38 mm

Stroke Length

 N/A 50 mm

Volume

 N/A 0.058 L

Weight

 N/A 0.66 kg

Industry Standards/Certifications

 N/A Association of German Engineers (VDI) Pressure Equipment Directive (PED 2014/68/UE)

Equivalent Part Numbers

 N/A Kaller No: K500-050 Special Spring: H500-050-C Tecapres No: TPSP500x50.1

Product Code

 N/A GS

Charging Pressure

Fully Open Force (Fo) at 20 Degree Celsius (ºC) Temperature

 N/A 470 daN

90 Percent (%) Fully Closed Force (F)

 N/A 625 daN

100 Percent (%) Fully Closed Force (Fc)

 N/A 645 daN

Charging Pressure at 20 Degree Celsius (ºC) Temperature

 N/A 150 bar

Dimensions

Fully Open Length (Lo)

 N/A 150 mm

Fully Closed Length (Lc)

 N/A 100 mm

Diagram

 N/A
Dimension Key Nitrogen Gas Spring

Note

Note

 N/A Product improvement through research and development is an ongoing process. All specifications are subject to change without notice.