Request Information
The R-Series gas spring features a threaded housing for design convenience and flexibility. The rounded head helps absorb radial forces. A range of predetermined forces are available for most models. Meets VDI Safety protocols.
Unit of Measure

Specifications

Brands

 N/A Ready

Pressure Medium

 N/A Nitrogen Gas (N2)

Maximum Charging Pressure

 N/A 175 bar

Minimum Charging Pressure

 N/A 35 bar

Rod Seal Area

 N/A 0.28 cm²

Operating Temperature

 N/A 0 to 80 ºC

Force Increase by Temperature

 N/A 0.33 %/°C

Maximum Stem Speed

 N/A 1.6 m/s

Maintenance Kit

 N/A Kit RB16

Maximum Stroke

 N/A 24 strokes/min

Stroke Length

 N/A 60 mm

Volume

 N/A 0.007 L

Weight

 N/A 0.08 kg

Industry Standards/Certifications

 N/A Association of German Engineers (VDI) Pressure Equipment Directive (PED 2014/68/UE)

Equivalent Part Numbers

 N/A Dadco: E.16.060 Hyson: T2SS3-16X1.5X60 Kaller No: EP316x1.5-60 Special Spring: NE16x1.5-060-B Tecapres No: TPRB16x60

Product Code

 N/A GS

Charging Pressure

Fully Open Force at Yellow Charging Pressure

 N/A 50 daN

Dimensions

Fully Open Length (Lo)

 N/A 165 mm

Fully Closed Length (Lc)

 N/A 105 mm

Housing Outside Diameter (D)

 N/A M16 x 1.5 mm

Piston Outside Diameter (d)

 N/A 6 mm

Mount-Piston Rod Distance (Piston Closed) (P)

 N/A 35 mm

Ring Groove (r)

 N/A 3 mm

Diagram

 N/A
Dimension Key Nitrogen Gas Spring

Note

Note

 N/A Product improvement through research and development is an ongoing process. All specifications are subject to change without notice.
No mounting holes on bottom.