Manufacturer Part# / Cross Reference Search

Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers. Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.

The T-Series stands for Titan! They feature a third more force than the BE Series in a similar sized housing. All T-Series springs are compatible with the optional Shield Scraper which cleans the stem with every stroke and helps avoid penetration of particles and substances to extend the springs useful life. Meets VDI Safety protocols.
Unit of Measure

Specifications

Brands

Ready

Pressure Medium

Nitrogen Gas (N2)

Maximum Charging Pressure

150 bar

Minimum Charging Pressure

50 bar

Rod Seal Area

19.63 cm²

Operating Temperature

0 to 80 ºC

Force Increase by Temperature

0.33 %/°C

Maximum Stem Speed

0.8 m/s

Maintenance Kit

Kit T75

Maximum Stroke

22 strokes/min

Stroke Length

80 mm

Volume

0.347 L

Weight

2.18 kg

Industry Standards/Certifications

Association of German Engineers (VDI) Pressure Equipment Directive (PED 2014/68/UE)

Equivalent Part Numbers

Tecapres No: Titan75x80

Product Code

GS

Charging Pressure

Fully Open Force (Fo) at 20 Degree Celsius (ºC) Temperature

3000 daN

90 Percent (%) Fully Closed Force (F)

5035 daN

100 Percent (%) Fully Closed Force (Fc)

5455 daN

Charging Pressure at 20 Degree Celsius (ºC) Temperature

150 bar

Dimensions

Fully Open Length (Lo)

197 mm

Fully Closed Length (Lc)

117 mm

Housing Outside Diameter (D)

75.2 mm

Piston Outside Diameter (d)

50 mm

Ring Groove (r)

2.5 mm

Diagram


Dimension Key Nitrogen Gas Spring

Note

Note

Product improvement through research and development is an ongoing process. All specifications are subject to change without notice.