Manufacturer Part# / Cross Reference Search

Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers.

Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.
Request a Quote on Bender
  • Designed to produce up to 300,000 parts per year
  • Standard CB1 87° Rocker angle produces consistent 90° bends in mild steel
  • Standard lengths: 12", 24" and 36" models.
  • Standard lengths can be wire cut by Diemaker to create shorter or multiple benders
  • No mounting holes, left for Designer/Diemaker to locate
  • S7 Tool Steel Full Hardened (Rc 56 to 62) Rocker for long life
  • Machineable Saddle with coated socket for lubrication and durability
  • Standard models are stocked for fast delivery
  • 3D CAD models available
Unit of Measure

Features

Features

 N/A
  1. Rockers: fully hardened (Rc 56 to 62), S-7 tool steel.
  2. Saddles: machinable thru hardened steel; mounting holes left for diemaker to locate where needed. Contact Ready Engineering for suggestions.
  3. Saddle socket is coated for lubrication and long life. Saddle has flush mount lube fittings.
  4. Rockers and saddles are CNC ground for precision and interchangeability.
  5. Rocker angle is 87º on all standard benders. This allows for 3º of overbend to produce consistent 90° forms in mild steel. Harder steel or larger part radii may require more overbend. Rocker angles can be specified at time of order or altered by the diemaker.

Specifications

Rocker Diameter

N/A 2.000 in

Part Thickness (PT)

 N/A 0.121 to 0.164 in
Part Height Check (PH)1 N/A 0.775 in

In Stock Length (X)

 N/A 12 in

Minimum Length

N/A 2.500 in

Maximum Length (X)

 N/A 36 in

Saddle Width (SW)

 N/A 4.875 in Saddle-Width.jpg

Saddle to Front (SF) Width

 N/A 1.875 in Saddle-to-Front.jpg

Saddle to Key (SK) Width

 N/A 3.000 in Saddle-to-Key.jpg

Saddle Height (SH)

 N/A 2.375 in Saddle-Height.jpg

Gib Length (GL)

 N/A 2.500 in Gib-Length.jpg

Rocker Angle

 N/A 87 º

Thickness

 N/A 11 to 8 gauge

Product Code

 N/A RB

Rocker Dimensions

Rocker Dimension (B)

 N/A 0.678 in a1490.jpg

Rocker Dimension (C)

 N/A 0.624 in

Rocker Dimension (J)

 N/A 0.786 in

Note

Note

 N/A 12, 24" & 36" lengths in stock, 2", 2 1/2" and 3" Diameter Rockers

Additional Information

Additional Information

 N/A
  • Designed so you can segment to shorter custom lengths.
  • Minimum segment size is the Gib Length (GL).
  • Custom lengths available, specify.
  • 1 To use standard benders, PH should exceed these dimensions. Fax prints for specials.