Manufacturer Part# / Cross Reference Search

Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers.

Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.
When ordering custom, all steel die sets, specify:
  1. This table shows accepted design dimensions. Any or all of these dimensions, however, can be changed to conform to customer's specifications of A, B, O, P, J, K, L, F or W, etc.
  2. All die sets are always made so that the punch holder can not be reversed on die holder. Type 4Ps are made with same diameter posts, but the right front post is offset 1/8" toward outside edge of die set.
  3. Any of these sets are available both with or without shank. Unless otherwise specified, shank is always located in middle of both A and B dimensions. For safety reasons, we supply only threaded shanks. See page 9 for Threaded Shank Selection Chart.
  4. Die sets of design other than shown in catalog can be furnished in steel or aluminum.
  5. Custom die sets may not be returned for credit.
  6. Sintered Bronze Bushings supplied unless otherwise specified.
Ready Die Set Quote Form
Unit of Measure
Items
Custom, Four Post All Steel Die Sets

6 to 10 Inch (in) Dimension (A) (Left to Right) Custom, Four Post All Steel Die Set
List Price Quote
Custom, Four Post All Steel Die Sets

11 to 16 Inch (in) Dimension (A) (Left to Right) Custom, Four Post All Steel Die Set
List Price Quote
Custom, Four Post All Steel Die Sets

17 to 22 Inch (in) Dimension (A) (Left to Right) Custom, Four Post All Steel Die Set
List Price Quote
Custom, Four Post All Steel Die Sets

23 to 28 Inch (in) Dimension (A) (Left to Right) Custom, Four Post All Steel Die Set
List Price Quote
Custom, Four Post All Steel Die Sets

29 to 40 Inch (in) Dimension (A) (Left to Right) Custom, Four Post All Steel Die Set
List Price Quote
Description N/A When ordering custom, all steel die sets, specify:
  1. This table shows accepted design dimensions. Any or all of these dimensions, however, can be changed to conform to customer's specifications of A, B, O, P, J, K, L, F or W, etc.
  2. All die sets are always made so that the punch holder can not be reversed on die holder. Type 4Ps are made with same diameter posts, but the right front post is offset 1/8" toward outside edge of die set.
  3. Any of these sets are available both with or without shank. Unless otherwise specified, shank is always located in middle of both A and B dimensions. For safety reasons, we supply only threaded shanks. See page 9 for Threaded Shank Selection Chart.
  4. Die sets of design other than shown in catalog can be furnished in steel or aluminum.
  5. Custom die sets may not be returned for credit.
  6. Sintered Bronze Bushings supplied unless otherwise specified.
Brands N/A Ready
Note N/A Right front pin offset 1/8".

It is recommended to finish heavy (point pressures) machining before grinding for best results. We do not recommend using steel and aluminum plates in a die set combination.
Application N/A
  • Aluminum die sets.
  • Three and four platen die sets.
  • Plate work, ground or unground.
  • Stress relieved plates.
  • Die sets can be made with heel blocks.
  • Per print CNC machining, holes, keyways, cut-outs and burnouts.
Dimension (A) (Left to Right) N/A 6 to 10 in N/A 11 to 16 in N/A 17 to 22 in N/A 23 to 28 in N/A 29 to 40 in
Die Holder Thickness (J) N/A 1-1/4 in N/A 1-1/2 in N/A 1-3/4 in N/A 2 in N/A 2-1/2 in
Punch Holder Thickness (K) N/A 1-1/4 in N/A 1-1/2 in N/A 1-3/4 in N/A 2 in N/A 2-1/2 in
Post Diameter (O) N/A 1 in N/A 1-1/4 in N/A 1-1/2 in N/A 1-3/4 in N/A 2 in
Dimension (F) for (O) Post N/A 2 in N/A 2-1/4 in N/A 2-1/2 in N/A 2-3/4 in N/A 3 in
Dimension (C) for (O) Post N/A 1-1/2 in N/A 1-5/8 in N/A 1-3/4 in N/A 1-7/8 in N/A 2 in
Note for Dimension N/A Dimensions furnished when customer specifies only A and B dimensions.
Product Code N/A DS-C