Manufacturer Part# / Cross Reference Search

Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers.

Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.
Request Information
These tanks should be selected when a larger gas volume or smaller tank size is required. The arrangement of service ports and tapped holes shown is only an example.
Unit of Measure

Specifications

Brands

 N/A Ready

Diameter D

 N/A 323.9 mm

Diameter d

 N/A 288.9 mm

Area

 N/A 655.2 cm²

Diameter P

 N/A 18 mm

Volume

 N/A Up to 100 L

Fabrication

 N/A Welded

General Capabilities

 N/A Custom

Note

Note

 N/A Changes of construction and errors of printing reserved. All pictures, sketches and details are not binding.

Additional Information

Additional Information

 N/A As with threaded tanks, one 1/2" - 20 BS 150 safety plug must be used for each 5 liters of gas volume. The maximum number of tapped holes possible per side is indicated.

Dimensions

Dimension B

 N/A 350 mm

Dimension E

 N/A J+170

Dimension F

 N/A J+210

Dimension G

 N/A 280 mm

Dimension H

 N/A 45 mm

Ordering Information

Ordering Information

 N/A To order please specify:
  • Model number and required volume
  • Number, size and position of connections
  • Example:
    (1) NPT 8-10 Liters
    (2) 1/2" - 20 at F1
    (1) 3/4" - 16 at F3