Manufacturer Part# / Cross Reference Search

Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers.

Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.
Request Information
All LE-Series gas spring meet ISO and VDI stem rod, body, and height standards. In addition to mounting and charge port specifications. Compatible with the optional Shield Scraper which cleans the stem with every stroke and helps avoid penetration of particles and substances to extend the springs useful life. Although self-contained, all models can be connected to a linked hose system. Meets VDI Safety protocols.
Unit of Measure

Specifications

Brands

 N/A Ready

Pressure Medium

 N/A Nitrogen Gas (N2)

Maximum Charging Pressure

 N/A 150 bar

Minimum Charging Pressure

 N/A 35 bar

Rod Seal Area

 N/A 19.63 cm²

Operating Temperature

 N/A 0 to 80 ºC

Force Increase by Temperature

 N/A 0.33 %/°C

Maximum Stem Speed

 N/A 1.6 m/s

Maintenance Kit

 N/A Kit S3000

Body Diameter

 N/A 95 mm

Stroke Length

 N/A 38 mm

Volume

 N/A 0.279 L

Weight

 N/A 6.15 kg

Industry Standards/Certifications

 N/A Association of German Engineers (VDI) CNOMO International Organization for Standardization (ISO) Pressure Equipment Directive (PED 2014/68/UE)

Equivalent Part Numbers

 N/A Dadco: 90.10.03000.038 Hyson: NP-3000x38.1 Kaller No: TU3000-038 Special Spring: SC3000-038-D Tecapres No: TPS3000x38

Product Code

 N/A GS

Charging Pressure

Fully Open Force (Fo) at 20 Degree Celsius (ºC) Temperature

 N/A 3000 daN

90 Percent (%) Fully Closed Force (F)

 N/A 3960 daN

Charging Pressure at 20 Degree Celsius (ºC) Temperature

 N/A 150 bar

Dimensions

Fully Open Length (Lo)

 N/A 196 mm

Fully Closed Length (Lc)

 N/A 158 mm

Diagram

 N/A
Ready LE-3000 Series ISO Line Gas Spring - 2

Note

Note

 N/A Product improvement through research and development is an ongoing process. All specifications are subject to change without notice.