Manufacturer Part# / Cross Reference Search

Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers.

Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.
Request Information
Our Precision Guide Pins are designed to be used with either plain bearing or ball bearing bushings.

Vacuum degassed, ball bearing quality steel is induction hardened to 60 - 64 Rc, then core tempered for toughness. This produces an optimum combination of wear resistance for long operating life and shock resistance for safety.
Unit of Measure

Specifications

Brands

 N/A Ready

Nominal Pin Diameter

 N/A 40 mm

Length L

 N/A 160 mm

Tap Size

 N/A M10

Recommended Seating Torque

 N/A 4.40 kg·m

R6 Bore Diameter

 N/A 39.955 mm39.971 mm

Product Code

 N/A PB

Additional Information

Additional Information

 N/A Our extensive line of metric guide components, which have been used by European toolmakers and stamping plants for over 30 years.

Our design is elegantly simple. All of our guide pillars, press fit and demountable, fit an R6 bored hole. All our bushings, ball bearing and plain bearing, straight and demountable, fit an H6 bored hole:

As with our line of inch components, each Ready metric pillar can be used either as a plain bearing or ball bearing pin. Every pin and bushing is color coded for Selective Fit™, providing you with the correct running clearance for your application.