Request Information
All LE-Series gas spring meet ISO and VDI stem rod, body, and height standards. In addition to mounting and charge port specifications. Compatible with the optional Shield Scraper which cleans the stem with every stroke and helps avoid penetration of particles and substances to extend the springs useful life. Although self-contained, all models can be connected to a linked hose system. Meets VDI Safety protocols.
Unit of Measure

Specifications

Brands

 N/A Ready

Pressure Medium

 N/A Nitrogen Gas (N2)

Maximum Charging Pressure

 N/A 150 bar

Minimum Charging Pressure

 N/A 35 bar

Rod Seal Area

 N/A 70.88 cm²

Operating Temperature

 N/A 0 to 80 ºC

Force Increase by Temperature

 N/A 0.33 %/°C

Maximum Stem Speed

 N/A 1.6 m/s

Maintenance Kit

 N/A Kit S10000

Body Diameter

 N/A 195 mm

Stroke Length

 N/A 125 mm

Volume

 N/A 3.104 L

Weight

 N/A 50.50 kg

Industry Standards/Certifications

 N/A Association of German Engineers (VDI) CNOMO International Organization for Standardization (ISO) Pressure Equipment Directive (PED 2014/68/UE)

Equivalent Part Numbers

 N/A Dadco: 90.10.10000.125 Hyson: NP-10000x125 Kaller No: TU10000-125 Special Spring: SC10000-125-D Tecapres No: TPS10000x125

Product Code

 N/A GS

Charging Pressure

Fully Open Force (Fo) at 20 Degree Celsius (ºC) Temperature

 N/A 10000 daN

90 Percent (%) Fully Closed Force (F)

 N/A 13450 daN

Charging Pressure at 20 Degree Celsius (ºC) Temperature

 N/A 141 bar

Dimensions

Fully Open Length (Lo)

 N/A 410 mm

Fully Closed Length (Lc)

 N/A 285 mm

Diagram

 N/A
Ready LE-10000 Series ISO Line Gas Spring - 2

Note

Note

 N/A Product improvement through research and development is an ongoing process. All specifications are subject to change without notice.