Request Information
All LE-Series gas spring meet ISO and VDI stem rod, body, and height standards. In addition to mounting and charge port specifications. Compatible with the optional Shield Scraper which cleans the stem with every stroke and helps avoid penetration of particles and substances to extend the springs useful life. Although self-contained, all models can be connected to a linked hose system. Meets VDI Safety protocols.
Unit of Measure

Specifications

Brands

 N/A Ready

Pressure Medium

 N/A Nitrogen Gas (N2)

Maximum Charging Pressure

 N/A 150 bar

Minimum Charging Pressure

 N/A 35 bar

Rod Seal Area

 N/A 10.18 cm²

Operating Temperature

 N/A 0 to 80 ºC

Force Increase by Temperature

 N/A 0.33 %/°C

Maximum Stem Speed

 N/A 1.6 m/s

Maintenance Kit

 N/A Kit S1500.1

Body Diameter

 N/A 75 mm

Stroke Length

 N/A 100 mm

Volume

 N/A 0.437 L

Weight

 N/A 4.80 kg

Industry Standards/Certifications

 N/A Association of German Engineers (VDI) CNOMO International Organization for Standardization (ISO) Pressure Equipment Directive (PED 2014/68/UE)

Equivalent Part Numbers

 N/A Dadco: 90.10.01500.100 Hyson: NP-1500x100 Kaller No: TU1500-100 Special Spring: SC1500-100-D Tecapres No: TPS1500x100.1

Product Code

 N/A GS

Charging Pressure

Fully Open Force (Fo) at 20 Degree Celsius (ºC) Temperature

 N/A 1500 daN

90 Percent (%) Fully Closed Force (F)

 N/A 1905 daN

Charging Pressure at 20 Degree Celsius (ºC) Temperature

 N/A 148 bar

Dimensions

Fully Open Length (Lo)

 N/A 310 mm

Fully Closed Length (Lc)

 N/A 210 mm

Diagram

 N/A
Ready LE-1500 Series ISO Line Gas Spring - 2

Note

Note

 N/A Product improvement through research and development is an ongoing process. All specifications are subject to change without notice.