Manufacturer Part# / Cross Reference Search

Please use this search function to find READY die set components that are equivalent to commonly used pins, bushing, ISO Springs, and Gas Springs from other manufacturers.

Please Note: We believe this cross reference to be accurate. Please review the specifications to ensure the item will work in your application. Gas Spring equivalents were based on body dimensions, on contact force and stroke length.
Ready Die Set Quote Form
  • Burned edges
  • Thickness ±1/16
  • AISI 1020 steel available from stock
Unit of Measure

Specifications

Brands

 N/A Ready

Length

 N/A 24 in

Thickness

 N/A 1 in1/2 in3/4 in

Width

 N/A 25 in

Note

Note

 N/A It is recommended to finish heavy (point pressures) machining before grinding for best results. We do not recommend using steel and aluminum plates in a die set combination.

Advantages

Advantages

 N/A
  • One-third the weight of steel
  • Faster and easier setup
  • Less wear and tear on the machine (clutch, brake, ram, ...)
  • Easy machinability means 20-35% increased feed rates
  • Uses existing conventional cuttings tools
  • Draws heat away from tooling, then dissipates heat quickly
  • Rust free, least susceptible to elements
  • Impervious to typical (water soluble) die lubes
  • Non-magnetic - good environment for in-die sensing
  • Stress relieved in the process - a stable material before/after machining
  • Easily recyclable